How to Set Up the Highest Log-level

How to Set Up the Highest Log-level

To perform a more detailed check, you need to adjust the log-level settings.
Follow these steps:

1. Close the NumberOk application.
2. Navigate to the following directory: C:\ProgramData\FF\NumberOk3.
3. Locate the NumberOk.ini file.
4. Open the NumberOk.ini file and find the string Log.Level.
5. Modify this string to read: 0xFFFFFFFF.
6. Save the changes and close the file.

This will set the log level to its highest setting, allowing for more detailed logging.





    • Related Articles

    • LPR Analytics Setup

      NumberOk offers advanced recognition settings to compensate camera installation disadvantages, bad weather conditions, lack of lighting, and number plates defects. This manual describes ANPR Analytics Setup in details to allow the user to set the ...

    • LPR Results: Developer’s API

      Common Configuration file, log files, database reside in %ALLUSERSPROFILE%\FF\NumberOk. To enable TCP server in NumberOk set configuration parameter “NetServer.Enable” to 1 (by default 0). To enable TCP server in NumberOk3 you can use GUI interface ...

    • Multiple Workstations Software Update

      Prerequisites Should you have more than one instance of NumberOk (including NumberOk Reporter) sharing the same database make sure to start with a computer that hosts the database file: (a) Open C:\ProgramData\FF\NumberOk3\NumberOk.ini (Check ...

    • I/O Modules

      Connecting Modbus-compliant executive devices Connection to executive devices The NumberOk system supports executive control modules with the Modbus protocol. To connect make the next steps : 1. select from the drop-down list of the manufacturer ...

    • Recognition Settings

      To obtain ANPR results you will need to: connect to the video sources adjust recognition zones adjust ANPR analytics It is also important to have the connected cameras mounted and set up properly. ANPR Setup Connect video source Navigate to Settings ...