Navigate to Settings > Integration > LPR Cameras

Click Add Camera button.

Add LPR camera dialog will open. Complete the dialog with the following:

• Camera type - FF group protocol

• Describe your camera

• Specify geo-location and geodesic azimuth (optional)

• Set URL for connection. This is the current computer IP address. Follow the template: http://10.10.10.10:8080/

The default port is 8080. Example:

Provided the hosting computer has the address 192.168.1.113, the URL would be: http://192.168.1.113/

When there is a firewall between the camera and NumberOk Meta then those will communicate via the firewall using the firewall’s IP addresses. The camera will send data to the firewall’s LAN IP through ports assigned by the administrator (on the diagram above those are 10.0.2.1 and 7180 accordingly). The firewall should allow bi-directional TCP connections initialized by the camera and whatever port is assigned it should be forwarded to NumberOk’s port 8080. 9As per the example above the connection URL would be http://10.0.2.1:7180/

Click Generate auth data and copy the resulting code to the clipboard. To copy the data right-click the mouse and then Select All, right-click again, and select Copy.

Launch NumberOk Edge LPR app on a camera. 

Navigate to the NumberOk tab, paste auth data.

Check Enabled and click Activate

Navigate to Settings, and scroll down until NumberOk-cloud settings.  

Paste the authentication code into the NumberOk Data input field.

Check the NumberOk-cloud settings check-box.

Click Save settings.

NumberOk Meta work with  one database for  all recognition event form  connected to LPR  cameras 

NumberOk Meta can process LPR data from LPR cameras.